Installing sod can be an exciting project as you will soon have a new yard for your home. Before you jump straight in and start placing orders, it is important to make sure you plan and budget accordingly so that you have all the necessary tools and materials ahead of time. This will ensure you complete the installation process properly and keep you from wasting time and money. Read below to get a better idea of all the tools and materials you will need to ensure you install your new lawn appropriately. Once you have a better idea of the tools you will need, be sure to read our step-by-step guide on how to properly install sod, and care tips for establishing a new lawn.
The soil analysis kit is definitely useful for when you’re installing a new lawn, however it is not mandatory to get the job done. A soil analysis kit can be used to test the soil to determine the overall health of your grass. It will help you balance your soil’s pH so that when you apply nutrients like fertilizer, your grass is able to actually absorb the nutrients. If your soil’s pH is off, nutrients won’t be properly absorbed, meaning the fertilizer you apply may be a waste of money. It is important to know that the process of taking a soil analysis and send it in to a laboratory is affordable, but typically takes about two weeks to complete. With that being said, doing this before you install sod is a good idea so you have time to receive results and determine what your soil needs.
Be sure to check out our article on Collecting and Submitting a Soil Analysis for more information on soil tests.
One of the very first things you will need during the sod installation process is Roundup or some other glyphosate-based product to kill your old grass so that you can easily remove it. Be sure the product you purchase is a non-selective herbicide that will kill everything it comes in contact with to ensure your lawn is completely dead. Killing your old grass before removal makes the process easier as you won’t be fighting deep roots. Wait three to four days after the first application and make a second application. Follow all label instructions and safety precautions with your glyphosate product.
When you are ready to remove your dead grass, a sod cutter or roto-tiller will prevent you from enduring any back-breaking labor. A sod cutter or roto-tiller will remove the top layer of grass and debris to create a smooth and graded surface for laying new turf. Walk-behind sod cutters and roto-tillers can be expensive and are only used every so often, so we recommend renting one for a few hours from a local hardware store like Home Depot. You can also look into renting CLASSEN® equipment in different locations here. For more information on sod cutters and when to use them, click here.
Topsoil and a landscape rake are needed for leveling the soil out after you’ve removed the dead grass. All you should have left is soil. Use a landscape rake such as the one pictured below to loosen up the soil and organic matter across your whole lawn. Next, you will want to use the backside of the landscape rake, which is a smooth, flat surface, to level out the surface of the soil. A landscape rake in particular is helpful for this process because you can use both sides to get the job done.
Topsoil is needed if you find that you need to add more soil to your yard to level it out during this process. The amount of topsoil you will need depends on the size of your yard. We recommend using our area calculator tool to find out how many square feet you will need to cover, and then use the topsoil calculator here to see how much topsoil you will need for your yard: http://www.topsoilcalculator.net/
For more information on preparing and leveling your soil, take a look at our article: Leveling Your Soil and Preparing for Installation.
After you have pulled up organic matter and added topsoil to your yard in step 5 of the installation process, it’s a good idea to let the soil settle some more so that you can get a better visual for how leveled your yard is before installation. You can either choose to wait for rainfall if it is forecasted in the near future or you can use a sprinkler to accomplish this task.
A wheel barrel or wagon that comes with pneumatic tires is useful for when you are laying sod in step 6 of the installation process. If you have to transport sod from one section of a yard to another, consider the use of one of these helpful tools. A three-wheeled wheel barrel is less prone to tip over.
In step 6 on the installation process, laying the new sod, you will need to cut individual pieces of sod into irregular shapes to fit different landscaping curves in your yard. The razor of a box-cutter works well and if you have a few spare razor blades, you should be fine. A garden knife will be helpful for cutting sod, weeding and digging as well.
You can read more about some handy tips when laying your new sod in our Tips for Your Next Sod Job article.
LawnifiTM is a liquid fertilizer program powered by Catalyst TechnologyTM. The New Lawn Starter Box contains everything a new lawn needs during establishment to develop thick, healthy grass. The New Lawn Starter Box contains two bottles of Grow and one bottle of Maintain. Start with your first application of Grow on the soil right before laying the sod. Grow is designed to quickly establish roots with highly available phosphorus, potassium and carbon that benefits rooting, plant strength and growing quality. This gives the sod you are about to lay an immediate, accessible boost of necessary establishment nutrients. The other two applications will take place after you lay the sod in Establishing a Newly Sodded Lawn.
This tool will be used after you have laid out your new sod. A landscape edger should be used to trim around corners and at the edges of sod pallets where they don’t fit precisely. You can also use a machete or outdoor blade as well. Usually, sod pallets are cut by the sod harvesters in slight angles. You can use this to your advantage to get tighter seams by matching the angle on the pieces to fit together as snuggly as possible. Use the edger in every other place necessary.
One of the last tools you will need is a lawn roller to roll out your new sod so that is evenly pressed into the soil for proper growing and smoothness. This is another tool you will use rarely and can seem quite expensive. You can purchase them online for about $75.00, or rent one for a day for about $20.00 from a local hardware store like Home Depot.
Once you have the necessary tools for installation, you are now ready to install your new sod. Take a look at our How to Properly Install Sod page to guide you through the installation process. Once you have finished installing, be sure to come back and read our Establishing a Newly Sodded Lawn guide to ensure you are performing the proper maintenance practices for your newly sodded lawn.
|There are no products|